World's Leading Dash Camera Manufacturer
  • Free Cloud add-on service with compatible BlackVue models

  • Free Mobile Apps and BlackVue Viewer (Windows/Mac)

Power Magic Pro

Hardwiring Kit with Parking Mode Switch.
Enjoy your dashcam’s Parking Mode.
Protect your car’s Battery.

Power Magic Pro

Hardwiring Kit with Parking Mode Switch.
Enjoy your dashcam’s Parking Mode. Protect your car’s Battery.

PROTECT YOUR Battery. ENJOY PARKING MODE.

Power Magic Pro supplies power to your BlackVue from your vehicle’s battery according to the configured voltage and timer to prevent vehicle battery discharge.

Model Name Power Magic Pro    
Rated output voltage DC 12~24V Output current / Quiescent current Rated current 1A, Max. 2A / Under 200µA
Output voltage cut-off
(on the basis of the input)
12 ~ 12.5V (±0.1V) / 22.8 ~ 23.2V (±0.2V) Output Voltage Restoration
(on the basis of the input)
Cut-off voltage +0.2V and higher
Output Voltage Cut-off Timer Function 6 hours ~ Infinity    
 
blackvue-power-magic-pro-hardwiring-kit-installed-view

Parking Mode Switch

Parking Mode Switch ON: Power Magic Pro supplies your BlackVue with power even if the ignition of the vehicle is turned off, until it reaches voltage cut-off or timeout value.

Parking Mode Switch OFF: Power Magic Pro supplies power to your dashcam only when vehicle ignition is on.

Timer Cut-off Settings

You can configure Power Magic Pro to supply power to your BlackVue for a preset duration, from 6 hours to infinity. The timer function is only active when the vehicle’s ignition is off and automatically stops if ignition is on.

* Regardless of the timer setting, the power is cut as soon as the voltage drops below the configured voltage cut-off value.

power-magic-pro-pmp-time-configuration-diagram
voltage-configuration-power-magic-pro

Low Voltage Cut-Off Settings

When vehicle’s ignition is off, Power Magic Pro checks your vehicle’s battery voltage periodically while powering your BlackVue. If power drops below the set cut-off level, Power Magic Pro automatically cuts power to the dashcam, thus saving your vehicle’s battery life.

Parking Mode Switch

Parking Mode Switch ON: Power Magic Pro supplies your BlackVue with power even if the ignition of the vehicle is turned off, until it reaches voltage cut-off or timeout value.

Parking Mode Switch OFF: Power Magic Pro supplies power to your dashcam only when vehicle ignition is on.

power-magic-pro-pmp-time-configuration-diagram

Timer Cut-off Settings

You can configure Power Magic Pro to supply power to your BlackVue for a preset duration, from 6 hours to infinity. The timer function is only active when the vehicle’s ignition is off and automatically stops if ignition is on.

* Regardless of the timer setting, the power is cut as soon as the voltage drops below the configured voltage cut-off value.

power-magic-pro-pmp-voltage-cut-off-configuration-diagram

Low Voltage Cut-Off Settings

When vehicle’s ignition is off, Power Magic Pro checks your vehicle’s battery voltage periodically while powering your BlackVue. If power drops below the set cut-off level, Power Magic Pro automatically cuts power to the dashcam, thus saving your vehicle’s battery life.

Power your BlackVue In Parking Mode

with Power Magic Pro or Power Magic Battery Pack.

Rest easy, knowing that your car is being monitored while you are away.
BlackVue dashcams automatically switch to Parking Mode to monitor your parked vehicle, but only writes to the memory card when something happens (motion or impact detected), which has two benefits:

  • Less chance for important files to be overwritten during long Parking Mode sessions.
  • Extended memory card lifespan in the long run.
blackvue-parking-mode-pmp-power-magic-pro-diagram
blackvue-parking-mode-pmp-power-magic-pro-diagram-installation